edited by @Untitled

Overview

With a completely redesigned cutting carriage and blade holder, the GS-24 offers great stability, up to 10x overlap cutting, and a down-force of up to 350 grams so that you can cut even on thick, dense substrates.

• Video overview on Roland gs-24 operation

How to use the Roland GS-24 Vinyl Cutter

In this video, MakeHaven Shop Manager Lior Trestman goes over the use of the Roland GS-24 Vinyl Cutter. 0:00:00 Intro 0:00:14 Anatomy of the tool 0:01:29 Blade and blade holder 0:05:03 computer operation 0:05:43 CutStudio 0:06:33 loading vinyl 0:08:32 measuring the vinyl 0:10:30 test cut 0:12:30 setting the origin 0:13:45 vinyl menu operation 0:17:15 creating a design in CutCtudio 0:18:15 initiating a cut, cut studio settings 0:19:17 weeding and transfer tape 0:23:40 purchasing vinyl 0:25:11 using a roll of vinyl 0:27:21 Saving 0:28:13 Unsetup, changing the material



youtu.be

Loading the Vinyl

Load the vinyl into the cutter, ensuring proper alignment and tension

Calibration and Test Cut

• Calibrate the cutter to ensure accuracy.
• Perform a test cut to check the setup.

Design and Cutting Process

Blade and Pen Setup

Troubleshooting and Support

Support

Contact @Untitled or any available TA. You could also find very helpful information on the Roland website.

Additional Resources

Using CutStudio:

Roland GS-24 CutStudio Tutorial

youtu.be

Adobe Illustrator to Vinyl Cutter